HOWTO Setup Tripwire: Difference between revisions

From Research
Jump to navigation Jump to search
 
(29 intermediate revisions by the same user not shown)
Line 1: Line 1:
=== Setting Up a Tripwire Installation ===
=== Setting Up a Tripwire Installation ===


  <font color=red>hostname</font> <font color=blue>~ #</font> '''emerge tripwire'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''emerge tripwire mktwpol'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''cd /etc/tripwire'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''cd /etc/tripwire'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''emacs -nw /etc/tripwire/twpol.txt'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''emacs -nw /etc/tripwire/twpol-GENERIC.txt'''     ''(change '''HOSTNAME=''' to the proper hostname; no domain/no FQDN)
      ''<check that '''HOSTNAME=''' is sane (around line 64 - 70 depending on distribution)>''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''emacs -nw /etc/tripwire/twcfg.txt'''     ''(change /bin/nano to /usr/bin/vi for use during updating, for example)''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''sh ./twinstall.sh'''   ''#supply site- and local-key 4 times to setup, site-key a fifth time to sign tw.pol''
Create the keys, and sign the policy and configuration files:
<font color=red>hostname</font> <font color=blue>~ #</font> '''twadmin --create-polfile -S /etc/tripwire/site.key twpol.txt'''


Change the editor used by logwatch during updating:
  <font color=red>hostname</font> <font color=blue>~ #</font> '''cd /etc/tripwire ; /bin/bash twsetup.sh'''   ''(supply site- and local-key multiple times to setup, site-key another couple of times to sign tw.pol and tw.cfg)''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''emacs -nw /etc/tripwire/twcfg.txt'''
Now initialize everything (creates the database file /var/lib/tripwire/$hostname.twd)
<font color=red>hostname</font> <font color=blue>~ #</font> '''twadmin --create-cfgfile -S /etc/tripwire/site.key twcfg.txt'''
 
Now initialize everything (creates the database file  
  <font color=red>hostname</font> <font color=blue>~ #</font> '''tripwire --init'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''tripwire --init'''
Create the list of files we want to fingerprint and monitor:
<font color=red>hostname</font> <font color=blue>~ #</font> '''/usr/local/bin/mktwpol.sh > /etc/tripwire/twpol.txt'''
(If you don't have this on your system, grab it [[MEDIA:mktwpol.sh|'''HERE''']], name it '''/usr/local/bin/mktwpol.sh''', and make it executable with '''chmod u+x /usr/local/bin/mktwpol.sh'''


=== Generate a Report ===
=== Generate a Report ===


  <font color=red>hostname</font> <font color=blue>~ #</font> '''tripwire --check'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''tripwire --check'''
The first time you do this, there may be a few files not found.  Go through these, one by one, and either find the proper location of the file, or comment them out in the twpol.txt.  Sometimes files are re-located from what's in the original twpol.txt - like, a binary moved from /bin/ to /usr/bin/ or maybe from /sbin/ to /usr/sbin/.
<br><br>


=== File System Error Messages ===
=== File System Error Messages ===


To get rid of "File system error." messages where the file or folder does not exist, comment out the culprits from /etc/tripwire/twpol.txt  
To get rid of "File system error." messages where the file or folder does not exist, first check to see if the file has been re-located (somewhat common when updating packages), or comment out the culprits from /etc/tripwire/twpol.txt if it's truly disappeared.
<br>
<br>
  <font color=red>hostname</font> <font color=blue>~ #</font> '''emacs -nw /etc/tripwire/twpol.txt'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''emacs -nw /etc/tripwire/twpol.txt'''
'''A BETTER WAY''':
<font color=red>hostname</font> <font color=blue>~ #</font> '''/usr/sbin/mktwpol.sh /etc/tripwire/mktwpol-default.rules > /etc/tripwire/twpol.txt'''
Check the resulting /etc/tripwire/twpol.txt file for sanity... for example, if the ruleset was incorrect or unspecified during invocation of mktwpol.sh, you may see a very-short twpol.txt file that only references the tripwire files :-(


Then, update the policy file, delete and re-init the db:
Then, update the policy file, delete and re-init the db:


  <font color=red>hostname</font> <font color=blue>~ #</font> '''twadmin --create-polfile -S /etc/tripwire/site.key /etc/tripwire/twpol.txt'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''twadmin --create-polfile -S /etc/tripwire/site.key /etc/tripwire/twpol.txt'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''rm /var/lib/tripwire/$hostname.twd'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''rm /var/lib/tripwire/$hostname.twd*'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''tripwire --init'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''tripwire --init'''


Now, run a check, followed by an update.  This shifts files around, which will be flagged as "changed" on the next run, so re-run the check/update:
Now, run a check, followed by an update.  This shifts files around (mainly creates /var/lib/tripwire/$hostname.twd.bak) which will be flagged as "changed" on the next run, so re-run the check/update:


  <font color=red>hostname</font> <font color=blue>~ #</font> '''tripwire --check'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''tripwire --check'''
Line 46: Line 53:
=== Tidying Up ===
=== Tidying Up ===


After a while, the '''/var/log/tripwire/report/''' directory becomes quite large.  At some point, these historical reports are of no value, so they can be deleted.  One guideline might be to blow away anything more than 6 months old.
After a while, the '''/var/lib/tripwire/report/''' directory becomes quite large.  At some point, these historical reports are of no value, so they can be deleted.  One guideline might be to blow away anything more than 6 months old.


=== Troubleshooting ===
=== Troubleshooting ===


An error of:  '''Fatal Exception  st9exception''' indicates that the tripwire database has become corrupted.  Re-initialize (tripwire --init) and follow the steps under File System Error Messages.
An error of:  '''Fatal Exception  st9exception''' indicates that the tripwire database has become corrupted.  Re-initialize (tripwire --init) and follow the steps under File System Error Messages.

Latest revision as of 22:51, 4 January 2018

Setting Up a Tripwire Installation

hostname ~ # emerge tripwire mktwpol
hostname ~ # cd /etc/tripwire
hostname ~ # emacs -nw /etc/tripwire/twpol-GENERIC.txt     (change HOSTNAME= to the proper hostname; no domain/no FQDN)
hostname ~ # emacs -nw /etc/tripwire/twcfg.txt     (change /bin/nano to /usr/bin/vi for use during updating, for example)

Create the keys, and sign the policy and configuration files:

hostname ~ # cd /etc/tripwire ; /bin/bash twsetup.sh   (supply site- and local-key multiple times to setup, site-key another couple of times to sign tw.pol and tw.cfg)

Now initialize everything (creates the database file /var/lib/tripwire/$hostname.twd)

hostname ~ # tripwire --init

Create the list of files we want to fingerprint and monitor:

hostname ~ # /usr/local/bin/mktwpol.sh > /etc/tripwire/twpol.txt

(If you don't have this on your system, grab it HERE, name it /usr/local/bin/mktwpol.sh, and make it executable with chmod u+x /usr/local/bin/mktwpol.sh

Generate a Report

hostname ~ # tripwire --check

The first time you do this, there may be a few files not found. Go through these, one by one, and either find the proper location of the file, or comment them out in the twpol.txt. Sometimes files are re-located from what's in the original twpol.txt - like, a binary moved from /bin/ to /usr/bin/ or maybe from /sbin/ to /usr/sbin/.

File System Error Messages

To get rid of "File system error." messages where the file or folder does not exist, first check to see if the file has been re-located (somewhat common when updating packages), or comment out the culprits from /etc/tripwire/twpol.txt if it's truly disappeared.

hostname ~ # emacs -nw /etc/tripwire/twpol.txt

A BETTER WAY:

hostname ~ # /usr/sbin/mktwpol.sh /etc/tripwire/mktwpol-default.rules > /etc/tripwire/twpol.txt

Check the resulting /etc/tripwire/twpol.txt file for sanity... for example, if the ruleset was incorrect or unspecified during invocation of mktwpol.sh, you may see a very-short twpol.txt file that only references the tripwire files :-(

Then, update the policy file, delete and re-init the db:

hostname ~ # twadmin --create-polfile -S /etc/tripwire/site.key /etc/tripwire/twpol.txt
hostname ~ # rm /var/lib/tripwire/$hostname.twd*
hostname ~ # tripwire --init

Now, run a check, followed by an update. This shifts files around (mainly creates /var/lib/tripwire/$hostname.twd.bak) which will be flagged as "changed" on the next run, so re-run the check/update:

hostname ~ # tripwire --check
hostname ~ # tripwire --update --twrfile /var/lib/tripwire/report/<hostname_date_time>.twr
hostname ~ # tripwire --check
hostname ~ # tripwire --update --twrfile /var/lib/tripwire/report/<hostname_date_time>.twr

After System Changes

After you emerge packages or change config files:

hostname ~ # tripwire --update --twrfile /var/lib/tripwire/report/<a_previous_integrity_report>.twr

Tidying Up

After a while, the /var/lib/tripwire/report/ directory becomes quite large. At some point, these historical reports are of no value, so they can be deleted. One guideline might be to blow away anything more than 6 months old.

Troubleshooting

An error of: Fatal Exception st9exception indicates that the tripwire database has become corrupted. Re-initialize (tripwire --init) and follow the steps under File System Error Messages.