HOWTO Install Printers Under Windows

Windows Printer Installation

The following screenshots will guide you through a typical Lexmark T630 installation on a WindowsXP workstation.
First, invoke the Add Printer Wizard, choose to use a network printer, and specify the TCP/IP address of the desired printer (above).

File:Printers windows.PNG

You can get the Lexmark T630 or HP4600 drivers from the wiki. Unzip them to your C:\ drive, then tell the Add Printer Wizard that you Have Disk:

Browse to find the files; representative paths are shown (these paths result automatically from the unzipping)

File:Connecting printers 4.PNG

You will probably have to accept an unsigned driver.
It is preferable to choose the PCL (Page Control Language) driver option:

The HP4600 path is very similar to the Lexmark T630, if that's what you are installing:

Nothing we can do about this; accept the unsigned (Lexmark) driver, and wrap up your installation. You can print a test-page if you wish, to verify that it works.